Turbocharger 993 Turbo - K16/24 Steet - Right -Up to 555 HP - Remanufactured - Send In

The FVD Brombacher 993 K-16/24 street series turbochargers are created for those after power focused in the low and mid rpm range. Street series turbos are ideal for performance-oriented street driving, canyon carving or mountain climbs. Each turbo utilizes factory housings which are completely bolt on and do not require custom headers or modification of any kind. The factory like appearance of this turbocharger aligns perfectly with 993 Turbo values escalating for clean original cars.

Features:
Larger Compressor Wheel
Modified Compressor Housing
All New Bearing Housing
Uprated Thrust Bearing
Modified Wheel to Reduce Backpressure
Balancing of All Components
Factory Vacuum Unit
New Bearings and Seals
All Parts are Reconditioned

The remanufacturing process starts with re-profiling the OEM turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger, modified wheel. The larger wheel is also lightened which allows the turbo to flow a larger volume of air (more power), and aids in quicker spool up, better throttle response and greater acceleration. In addition, each turbo includes a completely new bearing housing for superior durability. The size of the inducer and exducer are also increased to compensate for the higher volume of air traveling through the compressor. These larger sizes were achieved with larger internals in factory housings which allow our turbos to retain a factory appearance.

Borg Warner / KKK certified technicians remanufacture our turbos. This ensures reliability, superior performance and a factory appearance. They ensure that each individual part is within the specified Borg Warner tolerance and balance them with protocols developed specifically for these turbos. Combined with our proprietary software, intercoolers and the tuning components found in our level 3 and 4 power kits, up to 555 hp can be achieved.

Necessary Parts:
2 Qty. Turbocharger Installation Kits - part # 22162
1 Qty. 5.0 Bar Fuel Pressure Regulator – part # 649
1 Qty. FVD Software Tuning - 1995 + 1996 models – part # 18233 or 1997 + 1998 models – part # 525

Optional Parts:
1 Qty. Oil Backflow Prevention Kit – part # 50643
2 Qty. FVD Diverter Valves – part # 31487
1 Qty. Reinforced Intercooler Hose Set – part # 5580

Please note:This service is only for K16 turbochargers (993 Turbo), a K24 (993 X50 Turbo, 993 GT2) is not considered a valid core for this part number. Each turbocharger is remanufactured in Germany, so the lead times can vary. New DME (ECU) engine management software is necessary for these turbochargers along with a 5.0 bar fuel pressure regulator.