Show Results For: Tools

Active Filter:

Tools

Durametric Diagnostic Tool and Computer - Professional - GER/ENG LANGUAGE

Our Tester is capable of displaying and clearing trouble codes on most control modules. Most Porsche cars made since 1990 have multiple computers built into different parts of the car. These compu...

Reference No.: FVD 721 500 AC1

CHF 1'208.90 without TAX

CHF 1'306.80 incl. VAT
without Shipping

Engine Holder - Crankshaft Housing 911 / 964 / 993 / 996 TT / 996 GT3 / 997.1 Turbo / 997.1 GT3

Spezialwerkzeug zur Befestigung des Kurbelwellengehäuses über 4 Stehbolzen am Spannbock, in Verbindung mit Motorhalter (P201)

Reference No.: FVD 721 966 70

CHF 218.90 without TAX

CHF 236.65 incl. VAT
without Shipping

Engine Stand Support 911 / 964 / 993 / 996 TT / 996 GT3 / 997.1 Turbo / 997.1 GT3 - 60 mm / 2.350"

Reference No.: FVD 721 T31 D

CHF 438.90 without TAX

CHF 474.45 incl. VAT
without Shipping

Engine Stand Support 996 / 997 / 986 / 987 - 60 mm / 2.350 inch

Material: Steel Fits: Standard receiver - - 2.350 inch diameter 6 inch offset to clear flywheel and clutch

Reference No.: FVD 721 T31 E

CHF 438.90 without TAX

CHF 474.45 incl. VAT
without Shipping

Engine Stand Support Adapter - Threaded Holes are 3/8"

This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" bolts, allowing for a full 360 degree motion of the motor. Bolts up to eve...

Reference No.: FVD 721 T31 9

CHF 152.90 without TAX

CHF 165.30 incl. VAT
without Shipping

Engine Support Bar (Special Service Tool) - 996/ 997

Special tool designed to support engine during removal of transmission for repair work. Mounts to rear sway bar mount points. Our optimized Tool fits 996 and 997 Models.

Reference No.: FVD 721 T25 4

CHF 218.90 without TAX

CHF 236.65 incl. VAT
without Shipping

Engine Timing Tool Cayenne

Reference No.: FVD 721 116 5951

CHF 137.50 without TAX

CHF 148.65 incl. VAT
without Shipping

Engine Timing Tool Mod. 981, 987, 991, 997 MA1 + MAB-Motor

Werkzeugsatz zum Einstellen der Motorsteuerzeiten beim Erneuern der Nockenwelle oder der Instandsetzung des Motors für Ihren Porsche 987.2 Cayman und Boxster/ 981 Cayman und Boxster/ 997.2 Carrera ...

Reference No.: FVD 721 116 602

CHF 438.90 without TAX

CHF 474.45 incl. VAT
without Shipping

Engine Timing Tool Mod. Panamera / Cayenne V8

- zum Einstellen der Nockenwellen-Steuerzeiten - wird benötigt beim Wechseln der Zylinderkopfdichtung, Erneuern der Nockenwellen, etc. - beinhaltet folgende Werkzeuge: - Nockenwellen-Einstellwerkze...

Reference No.: FVD 721 116 595

CHF 137.50 without TAX

CHF 148.65 incl. VAT
without Shipping

Engine Timing Tool Mod. 986/996

- zum Einstellen der Motorsteuerzeiten - passend für folgende Porsche Modelle: - Boxster 2500 ccm, ab Bj. 1998 - Boxster 2700 ccm, ab Bj. 2000 - Boxster 3200 ccm, ab Bj. 2000 - 911 Carrera ...

Reference No.: FVD 721 116 596

CHF 460.90 without TAX

CHF 498.25 incl. VAT
without Shipping

Exhaust Camshaft Sprocket Tool - Locks / Holds / Turns

Reference No.: 000 721 965 31EQ

CHF 163.90 without TAX

CHF 177.20 incl. VAT
without Shipping

Flywheel lock 944

Reference No.: FVD 721 T23 3

CHF 86.90 without TAX

CHF 93.95 incl. VAT
without Shipping

Flywheel Lock 911 1965-98

Reference No.: FVD 721 T21 5

CHF 61.60 without TAX

CHF 66.60 incl. VAT
without Shipping

Flywheel Lock Tool 924S / 944

Reference No.: FVD 721 920 60

CHF 38.50 without TAX

CHF 41.60 incl. VAT
without Shipping

Front Camber Adjustment Tool 964

Reference No.: FVD 721 T23 5

CHF 42.90 without TAX

CHF 46.35 incl. VAT
without Shipping

Front Control Arm Bushing Assembly Tool Set - For Part # FVD 341 999 R + FVD 341 999 1

This custom set of press tools is designed to simplify installation of our part numbers FVD3419991 and FVD341999W Sold as a set. 1 necessary per car.

Reference No.: FVD 341 999 W

CHF 18.70 without TAX

CHF 20.20 incl. VAT
without Shipping

FVD Brombacher Folding Tow Hook - Threaded Type

Our German manufactured tow hook fits all Porsche's listed in the model fitment tab with factory threaded (screw-type) tow hooks. Features: Stainless Steel 2” Towing Eye Light Weig...

Reference No.: FVD 722 695 00

CHF 108.90 without TAX

CHF 117.70 incl. VAT
without Shipping

FVD Brombacher Folding Tow Hook - Threaded Type - Left Handed Thread

Our German manufactured tow hook fits all Porsche's with factory threaded (screw-type) tow hooks. Features: Stainless Steel 2” Towing Eye Light Weight: 1.6 lbs. (.76 kg) Fits a...

Reference No.: FVD 722 695 00LGW

CHF 108.90 without TAX

CHF 117.70 incl. VAT
without Shipping

Haynes Repair Manual 911 1965-89 - English

Book Description: Publication Date: January 15, 1999 Inside this manual you will find routine maintenance, tune-up procedures, engine repair, cooling and heating, air conditioning, fuel and exhaus...

Reference No.: 150 BP2 64

CHF 80.30 without TAX

CHF 86.80 incl. VAT
without Shipping

Haynes Repair Manual 944 1982-89 - English

Book Description: Publication Date: January 15, 1999 Inside this manual you will find routine maintenance, tune-up procedures, engine repair, cooling and heating, air conditioning, fuel and exhaus...

Reference No.: 150 BP1 027

CHF 60.50 without TAX

CHF 65.40 incl. VAT
without Shipping

Inner Caps - Numeric Racing - For Service / Secondary Installation of Shifter Cables (Set=5pcs.)

These Numeric Racing Inner Caps are a single use part designed to lessen noise inside the cabin. So if you plan to service your cables, or re-install your cables into another vehicle these inner ca...

Reference No.: FVD 424 049 C

CHF 30.80 without TAX

CHF 33.30 incl. VAT
without Shipping

Installation tool oli seal 986/996

This special service tool was developed for the proper installation of oil seal on "Pulley" side of crank shaft. Trying to do this task with any other method is risking a total engine failure by w...

Reference No.: FVD 721 T25 1

CHF 108.90 without TAX

CHF 117.70 incl. VAT
without Shipping

Intake Camshaft Sprocket Tool - Locks / Holds / Turns 996 Turbo/ GT2

Reference No.: 190 721 965 30EQ

CHF 163.90 without TAX

CHF 177.20 incl. VAT
without Shipping

Jack pad 911/930 65-89

Reference No.: FVD 721 T96 A1

CHF 39.60 without TAX

CHF 42.80 incl. VAT
without Shipping

Jack pad 911/930 65-89

Reference No.: FVD 721 T96 A

CHF 39.60 without TAX

CHF 42.80 incl. VAT
without Shipping

Jack pad 964/993 89-98

Reference No.: FVD 721 T96 B

CHF 31.90 without TAX

CHF 34.50 incl. VAT
without Shipping

Metric feeler gauge (45 degree) with 1 blade (.004")

Tool for easy valve clearance adjustment. 0.10mm (.004")

Reference No.: FVD 721 T37 A

CHF 20.90 without TAX

CHF 22.60 incl. VAT
without Shipping

Metric Feeler Gauge (90 degree) with 3 blades (0.10mm)

Tool for easy valve clearance adjustment. 0.10mm (.004")

Reference No.: FVD 721 T36 A

CHF 48.40 without TAX

CHF 52.30 incl. VAT
without Shipping

Mountingset "Cayenne" for "Master Gear" (FVD 721 102 565)

Reference No.: FVD 721 102 400C

CHF 3'340.70 without TAX

CHF 3'611.30 incl. VAT
without Shipping

Oil Filter Socket - Multi Model use

High quality German made Hazet # 2169 oil filter socket with a 14 flute, 3/8” drive and is 74.4 mm. Sold Individually.

Reference No.: FVD 721 T25 71

CHF 38.50 without TAX

CHF 41.60 incl. VAT
without Shipping

Oil Filter Wrench 911 / 930 / 964

Simply your next oil change by removing / installing your oil filter with a 3/8" drive ratchet or a 27mm 6-point wrench. Hazet wrench sourced directly from Germany to ensure quality and durability...

Reference No.: FVD 721 T25 72

CHF 30.80 without TAX

CHF 33.30 incl. VAT
without Shipping

Oil Filter Wrench 911 / 930 / 964 - for Bosch Oil Filters

Simply your next oil change by removing / installing your oil filter with this proprietary Bosch filter wrench. Sold Individually.

Reference No.: FVD 721 T25 73

CHF 24.20 without TAX

CHF 26.15 incl. VAT
without Shipping

Oil Seal Arbor

Oil Seal Arbor Tool necessary for the installation of the oil seal on the pulley side of the crank shaft.

Reference No.: FVD 721 T34 C

CHF 121.00 without TAX

CHF 130.80 incl. VAT
without Shipping

Owners manual 911 76 german

Reference No.: 190 466 810

CHF 115.50 without TAX

CHF 124.85 incl. VAT
without Shipping

owners manuel 911 85 french

Reference No.: 190 473 230

CHF 258.50 without TAX

CHF 279.45 incl. VAT
without Shipping

PDK Transmission Remove + Replace Tool Set - M 12 x 1.5 Bolts - Prevents Flywheel Damage

Während der (De-)Montage des PDK-Getriebes besteht die Gefahr, dass das Schwungrad durch das Abkippen des Getriebes beschädigt wird, wodurch die Membran plastisch verformt werden kann. Dieses Probl...

Reference No.: FVD 721 300 00PDK

CHF 38.50 without TAX

CHF 41.60 incl. VAT
without Shipping

PIWIS 1 - Diagnostic Line Kit for OBD 2 & OBD 1

Reference No.: FVD 721 971 82

CHF 434.50 without TAX

CHF 469.70 incl. VAT
without Shipping

Press-on tool for valve stern seal

Reference No.: FVD 721 336 5

CHF 58.30 without TAX

CHF 63.00 incl. VAT
without Shipping

Pulley Wrench 911, 65-74

Pulley wrench. Needed for securing the generator from rotating during R&R of pulley or fan belt. Applicable: Model - 911, year 1965-1974.

Reference No.: FVD 721 T44

CHF 63.80 without TAX

CHF 68.95 incl. VAT
without Shipping

Racing Metal Rod End - Numeric Racing - Left Hand Thread

If you are using Numeric Racing Performance Cables on your race car, then we suggest upgrading your rod ends to these steel ends which will take far more abuse at the track. These are recommended ...

Reference No.: FVD 424 049 EL

CHF 30.80 without TAX

CHF 33.30 incl. VAT
without Shipping

Show Results For: Tools

Shop by Model

Properties

Categories

Shop by brand

Active Filter: