Vis resultater for: Verktøy Porsche 924 (76-88)
Aktivt filter:
Verktøy Porsche 924 (76-88)Dele #: FVD 721 116 594
NOK 3 888,00 Uten MVA
thread repair kit Time-Sert M10x1,5 "14 parts"
The TIME-SERT system is based on a solid steel bush machined from a solid piece of material. The thin-walled bush is press-fitted to the workpiece. Therefore, TIME-SERT is able to withstand high co...
Dele #: FVD 721 000 000
NOK 4 768,00 Uten MVA
Tire Gauge - FLAIG - 11.8 inch (30 cm) Hose Connector & Release Valve - 4 Bar + 0-57 psi
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release a...
Dele #: FVD 721 801 049
NOK 1 200,00 Uten MVA
Tire Gauge - FLAIG - 45° Adapter
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is measured via fingertip button an...
Dele #: FVD 721 801 046
NOK 512,00 Uten MVA
Tire Gauge - FLAIG - Includes 3 Adapters (0° - 45° - 90°)
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release a...
Dele #: FVD 721 801 047
NOK 1 264,00 Uten MVA
Tire Repair Kit (36 pcs.) - with Case
Essential for vehicles with tubeless tires, this Car Tire Repair Kit will let you mend the puncture quickly and effectively within minutes. Excellent tool to keep in your car.
Dele #: FVD 721 000 REI
NOK 400,00 Uten MVA
Tool - Camshaft Timing
This degree wheel is used for the precise adjustment of camshafts. Fixed on the crankshaft it shows precise the degrees and the Top Dead Center – Bottom Dead Center (TDC - BDC). This tool makes ad...
Dele #: FVD 721 100 105
NOK 928,00 Uten MVA
Tool - Dial Gauge Holder - Z Block with Extension Pin
Needed for accurate adjustment of valves. Also includes a 50mm dial indicator extension pin. Dial indicator stem hole is 8mm and the valve head cover screw hole is 10 mm.
Dele #: FVD 721 T41 A
NOK 944,00 Uten MVA
Tool - Metric Dial Gauge
A metric dial gauge is a must for setting cam timing, measuring flywheel end play, crank shaft end play, etc. This is an extremely high quality, German “Käfer” gauge whose design conforms to stric...
Dele #: FVD 721 T63
NOK 944,00 Uten MVA
Tool - Vacuum Tester Kit / Brake Bleeder
Vacuum testing is gaining more importance every day as cars have more sophisticated servo-feedback devices fuel injection, EGR, emission controls, air conditioning, door locks, etc. You can waste h...
Dele #: FVD 721 883 0810
NOK 784,00 Uten MVA
Tool - Vacuum Tester Kit / Brake Bleeder - Complete
High quality, German made brake bleeder and vacuum pump kit. Ideal for use on brakes, clutches, HVAC, bleeding the fuel system or testing vacuum on a turbocharged system. Vacuum can be tested up ...
Dele #: FVD 721 883 081
NOK 2 640,00 Uten MVA
Torque Wrench 1/2" 10-60 Nm
Hazet 5120-3CT Drehmomentschlüssel (1/2"), 10-60 Nm,) - Abtrieb: 12,5 mm (1/2") - Genauigkeit ± 3% - Drehmomentbereich: 10-60 Nm - Skaleneinteilung: 0,5 Nm - Länge: 320 mm - Made in Germany
Dele #: FVD 721 801 087
NOK 2 912,00 Uten MVA
Dele #: FVD 721 801 080
NOK 3 184,00 Uten MVA
Dele #: FVD 721 801 083
NOK 19 808,00 Uten MVA
Torque Wrench 3/4" 140-980 Nm
Umschaltknarre zur Drehmomentüberprüfung an Verschraubungen mit Rechtsgewinde Klicksignal bei Erreichen des eingestellten Drehmoments Verriegelung des eingestellten Drehmomentwertes in Kunststoffka...
Dele #: FVD 721 801 0861
NOK 3 760,00 Uten MVA
Dele #: FVD 721 801 081
NOK 27 184,00 Uten MVA
Tow Strap Red (DMSB) red (10cm) fpr screw 7/16" (12mm)
Towing Strap with bendable stainless steel bolt-on hardware for up to 7/16'' or max 12 mm bolt; available in two lengths, one fixed at 100 mm (4'') and an adjustable version up to 400 mm (16''); co...
Dele #: 490 903 72
NOK 464,00 Uten MVA
Uni-Syn (butterfly can be synchronized)
Measures air intake of carbs and fuel injection stacks so that each butterfly can be synchronized for smoother running and full power.
Dele #: FVD 721 T27
NOK 304,00 Uten MVA
Valve spring adjuster
Einstellwerkzeug für Einbaumass Serien-Ventilfeder mit Serien-Nockenwellen von 34,5mm - 35,5 mm im 1mm Schritt skaliert.
Dele #: FVD 721 T4A
NOK 1 264,00 Uten MVA
Dele #: FVD 721 000 04
NOK 29 584,00 Uten MVA
Valve Spring Tester - Benchtop
Standard valve springs reach only 85 kg. FVD-Motorsport-Springs have up to 105 kg! The desired value for Race-Engines is max. 104 kg! The electronic spring scales is recommended to check the spring...
Dele #: FVD 721 000 03
NOK 22 800,00 Uten MVA
Wheel Detail Brush "conical"
Conical design - For gentle cleaning of steel and aluminum wheels - Length: 30cm.
Dele #: FVD 803 608
NOK 144,00 Uten MVA
Wheel Detail Brush "flat"
Flat design - For gentle cleaning on steel and aluminum wheels - Length: 23cm.
Dele #: FVD 803 607
NOK 80,00 Uten MVA
Dele #: FVD 721 T97 01
NOK 624,00 Uten MVA
Technical specification 924 / 924 Turbo 78-85 english
English An official Porsche publication. Each book is approximately 100 pages and details the complete specifications of the models listed. Gives wear limits: torque specs, body and engine serial ...
Dele #: 100 423 420
NOK 560,00 Uten MVA
Dele #: FVD 721 T48
NOK 464,00 Uten MVA
Bosch BAT 490 (230 V) - Charger - Professional Use
Professional charging: New operating modes: Standard program for quick and easy charging, expert program with flexible charging parameters Shorter charging times thanks to optimized charging profil...
Dele #: FVD 000 001 4
NOK 28 400,00 Uten MVA