Vis resultater for: Verktøy
Aktivt filter:
VerktøyHazet Lambda Probe (O2 Sensor) 1/2" Drive (12.5 mm) Socket
High quality Hazet Lambda Probe (O2 Sensor) 1/2" Drive (12.5 mm) Socket - For 22 mm Lambda Probe (O2 Sensor) Features: Long design Surface: chrome-plated Made in Germany Wrench ...
Dele #: FVD 721 T44 91A
NOK 1 216,00 Uten MVA
Pulley Wrench 911, 65-74
Pulley wrench. Needed for securing the generator from rotating during R&R of pulley or fan belt. Applicable: Model - 911, year 1965-1974.
Dele #: FVD 721 T44
NOK 928,00 Uten MVA
Tool - Dial Gauge Holder - Z Block with Extension Pin
Needed for accurate adjustment of valves. Also includes a 50mm dial indicator extension pin. Dial indicator stem hole is 8mm and the valve head cover screw hole is 10 mm.
Dele #: FVD 721 T41 A
NOK 944,00 Uten MVA
Camshaft Socket 911 / 964 / 965 / 993 / 993 Turbo 1981-98
at 993 only with adjustable chain sprocket
Dele #: FVD 721 T39 A
NOK 1 584,00 Uten MVA
Dele #: FVD 721 T38 A
NOK 1 392,00 Uten MVA
Metric feeler gauge (45 degree) with 1 blade (.004")
Tool for easy valve clearance adjustment. 0.10mm (.004")
Dele #: FVD 721 T37 A
NOK 304,00 Uten MVA
Metric Feeler Gauge (90 degree) with 3 blades (0.10mm)
Tool for easy valve clearance adjustment. 0.10mm (.004")
Dele #: FVD 721 T36 A
NOK 704,00 Uten MVA
Oil Seal Arbor
Oil Seal Arbor Tool necessary for the installation of the oil seal on the pulley side of the crank shaft.
Dele #: FVD 721 T34 C
NOK 1 760,00 Uten MVA
Engine Stand Support 996 / 997 / 986 / 987 - 60 mm / 2.350 inch
Material: Steel Fits: Standard receiver - - 2.350 inch diameter 6 inch offset to clear flywheel and clutch
Dele #: FVD 721 T31 E
NOK 6 384,00 Uten MVA
Dele #: FVD 721 T31 D
NOK 6 384,00 Uten MVA
Engine Stand Support Adapter - Threaded Holes are 3/8"
This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" bolts, allowing for a full 360 degree motion of the motor. Bolts up to eve...
Dele #: FVD 721 T31 9
NOK 2 224,00 Uten MVA
Synchro-tester
Tool for synchronizing carburettors. Measures the air intake on each carburettor or mechanical fuel injection stack for a smooth idle and power delivery. Easy to use.
Dele #: FVD 721 T27 SK
NOK 1 104,00 Uten MVA
Uni-Syn (butterfly can be synchronized)
Measures air intake of carbs and fuel injection stacks so that each butterfly can be synchronized for smoother running and full power.
Dele #: FVD 721 T27
NOK 304,00 Uten MVA
Oil Filter Wrench 911 / 930 / 964 - for Bosch Oil Filters
Simply your next oil change by removing / installing your oil filter with this proprietary Bosch filter wrench. Sold Individually.
Dele #: FVD 721 T25 73
NOK 352,00 Uten MVA
Oil Filter Wrench 911 / 930 / 964
Simply your next oil change by removing / installing your oil filter with a 3/8" drive ratchet or a 27mm 6-point wrench. Hazet wrench sourced directly from Germany to ensure quality and durability...
Dele #: FVD 721 T25 72
NOK 448,00 Uten MVA
Oil Filter Socket - Multi Model use
High quality German made Hazet # 2169 oil filter socket with a 14 flute, 3/8” drive and is 74.4 mm. Sold Individually.
Dele #: FVD 721 T25 71
NOK 560,00 Uten MVA
Engine Support Bar (Special Service Tool) - 996/ 997
Special tool designed to support engine during removal of transmission for repair work. Mounts to rear sway bar mount points. Our optimized Tool fits 996 and 997 Models.
Dele #: FVD 721 T25 4
NOK 3 184,00 Uten MVA
Installation tool oli seal 986/996
This special service tool was developed for the proper installation of oil seal on "Pulley" side of crank shaft. Trying to do this task with any other method is risking a total engine failure by w...
Dele #: FVD 721 T25 1
NOK 1 584,00 Uten MVA
Rear Main Oil Seal Installation Tool - Flywheel Side - Made in Germany
This special service tool was developed for the proper installation of oil the new style dry-fit PTFE seal, which is the seal on flywheel side of crank shaft. Trying to do this task with any other...
Dele #: FVD 721 T25 0
NOK 3 184,00 Uten MVA
Camshaft Holder Tool 986 / 996.1 - Easy
This special service tool was developed for the crucial task of securing the intake and exhaust camshafts in relation to each other during base timing, etc. Trying to do this task with any other m...
Dele #: FVD 721 T24 8
NOK 2 384,00 Uten MVA
Tool Rear Spoiler 996 Turbo + 997.1 Turbo/GT2 + 997.2 Turbo/S/GT2 - Pin Wrench
Tool to take off and install wing from rear spoiler (996 Turbo).
Dele #: FVD 721 T24 5
NOK 304,00 Uten MVA
Dele #: FVD 721 T24 2
NOK 672,00 Uten MVA
Dele #: FVD 721 T23 5
NOK 624,00 Uten MVA
Synchro Removal Tool 915 Transmission (1st and 2nd Gear Only)
Synchro Engagement Kit needed for the proper removal of synchro rings from the gear.
Dele #: FVD 721 T22 6
NOK 2 384,00 Uten MVA
Synchro Removal Tool 915 Transmission (3, 4, 5th Gear Only) + 901 Transmission (All Gears)
Synchro Engagement Kit needed for the proper removal of synchro rings from the gear.
Dele #: FVD 721 T22 5
NOK 2 384,00 Uten MVA
Synchro Hub Removal Tool 930 Turbo 1975-88 - 4 Speed Manual Transmission - 1st and 2nd Gear
Synchro removal / engagement tool kit is necessary for the proper removal of synchro rings from the gear. For Porsche 930 Turbo models with 4 speed transmissions from 1975-88 for 1st and 2nd gears.
Dele #: FVD 721 T22 4
NOK 3 024,00 Uten MVA
Synchro Hub Removal Tool 930 Turbo 1975-88 - 4 Speed Manual Transmission - 3rd and 4th Gear
Synchro removal / engagement tool kit is necessary for the proper removal of synchro rings from the gear. For Porsche 930 Turbo models with 4 speed transmissions from 1976-88 for 3rd and 4th gears.
Dele #: FVD 721 T22 3
NOK 2 384,00 Uten MVA
Rear Camber Adjustment Tool 911 / 944 - For Toe In
Camber Adjuster needed to adjust Toe - In of the rear suspension.
Dele #: FVD 721 T22 1
NOK 160,00 Uten MVA
Dele #: FVD 721 T21 50
NOK 2 480,00 Uten MVA
Dele #: FVD 721 T21 0
NOK 1 264,00 Uten MVA
Dele #: FVD 721 T20 4
NOK 992,00 Uten MVA