Show Results For: Engine
Active Filter:
EngineValve Spring Tester - Benchtop
Standard valve springs reach only 85 kg. FVD-Motorsport-Springs have up to 105 kg! The desired value for Race-Engines is max. 104 kg! The electronic spring scales is recommended to check the spring...
Reference No.: FVD 721 000 04
Expected in 4-14 days
$ 2,508.00
without Shipping
without Shipping
Valve spring adjuster
Einstellwerkzeug für Einbaumass Serien-Ventilfeder mit Serien-Nockenwellen von 34,5mm - 35,5 mm im 1mm Schritt skaliert.
Reference No.: FVD 721 336 4
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 136.00
without Shipping
without Shipping
Reference No.: FVD 721 801 081
Availability upon request
$ 2,304.00
without Shipping
without Shipping
Reference No.: FVD 721 801 083
Expected in 4-14 days
$ 1,679.00
without Shipping
without Shipping
Reference No.: FVD 721 801 080
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 270.00
without Shipping
without Shipping
Torque Wrench 1/2" 10-60 Nm
Hazet 5120-3CT Drehmomentschlüssel (1/2"), 10-60 Nm,) - Abtrieb: 12,5 mm (1/2") - Genauigkeit ± 3% - Drehmomentbereich: 10-60 Nm - Skaleneinteilung: 0,5 Nm - Länge: 320 mm - Made in Germany
Reference No.: FVD 721 801 087
Availability upon request
$ 247.00
without Shipping
without Shipping
Tool for Pulley blocking - New Design
Im Unterschied zum Originalen Halteschlüssel ( aus dem Bordwerkzeug ) ist bei dieser Variante der Zapfen mehr gekrümmt und etwas verlängert und sitzt somit besser im dafür vorgesehenen Loch der Rie...
Tool - Vacuum Tester Kit / Brake Bleeder - Complete
High quality, German made brake bleeder and vacuum pump kit. Ideal for use on brakes, clutches, HVAC, bleeding the fuel system or testing vacuum on a turbocharged system. Vacuum can be tested up ...
Reference No.: FVD 721 883 081
Expected in 4-14 days
$ 224.00
without Shipping
without Shipping
Tool - Vacuum Tester Kit / Brake Bleeder
Vacuum testing is gaining more importance every day as cars have more sophisticated servo-feedback devices fuel injection, EGR, emission controls, air conditioning, door locks, etc. You can waste h...
Reference No.: FVD 721 883 0810
In Stock
Warehouse Germany
$ 67.00
without Shipping
without Shipping
Tool - Nut crank shaft
Das spezielle Sonderwerkzeug, die Kurbelwellen-Stecknuss, ist für die präzise Handhabung und Kontrolle der Kurbelwelle in den Motoren M48.00, M48.50, M48.50S und M48.50T des Porsche 955 Cayenne ent...
Reference No.: 190 721 971 40EQ
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 70.80
$ 40.00
without Shipping
without Shipping
Tool - Metric Dial Gauge
A metric dial gauge is a must for setting cam timing, measuring flywheel end play, crank shaft end play, etc. This is an extremely high quality, German “Käfer” gauge whose design conforms to stric...
Reference No.: FVD 721 T63
In Stock
Warehouse Germany
$ 81.00
without Shipping
without Shipping
Tool - Dial Gauge Holder - Z Block with Extension Pin
Needed for accurate adjustment of valves. Also includes a 50mm dial indicator extension pin. Dial indicator stem hole is 8mm and the valve head cover screw hole is 10 mm.
Tool - Chain extensioner, without cable
Im OE-Werkzeug ist ein spezifischer Anschluss verbaut, der für Porsche-Fahrzeuge ausgelegt ist und einen Adapteranschluss für die Druckluft benötigt. Im Gegensatz hierzu verfügt das Werkzeug unsere...
Reference No.: 190 721 968 31EQ
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 349.76
$ 175.00
without Shipping
without Shipping
Tool - Camshaft Timing
This degree wheel is used for the precise adjustment of camshafts. Fixed on the crankshaft it shows precise the degrees and the Top Dead Center – Bottom Dead Center (TDC - BDC). This tool makes ad...
Reference No.: FVD 721 100 105
In Stock
Warehouse Germany
$ 78.64
without Shipping
without Shipping
Tool - Camshaft Holder - 9634
Needed to secure the camshaft ends during assembly. Includes Torx screws and nuts. Made in Germany.
Reference No.: FVD 721 116 592EU
In Stock
Warehouse Germany
$ 360.71
without Shipping
without Shipping
Reference No.: FVD 721 116 594
Availability upon request
$ 329.58
without Shipping
without Shipping
Reference No.: FVD 721 102 565AUF
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 680.00
without Shipping
without Shipping
Reference No.: FVD 721 802 25052
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 63.00
without Shipping
without Shipping
Reference No.: FVD 721 802 0382
Expected in 4-14 days
$ 45.00
without Shipping
without Shipping
Reference No.: FVD 721 804 081
Expected in 4-14 days
$ 13.00
without Shipping
without Shipping
Reference No.: FVD 721 804 087
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 62.00
without Shipping
without Shipping
Service Cover - REAR - 996 / 997
Manufactured from heavyweight black vinyl with an extra soft inner lining to preserve the paint and trim. A built-in pouch retains tools while you work on your engine.
Reference No.: 150 SC0 25
In Stock
Warehouse USA
Warehouse Germany
$ 223.00
without Shipping
without Shipping
Service Cover - REAR - 911 / 964/ 993 - 1966-98
Manufactured from heavyweight black vinyl with an extra soft inner lining to preserve the paint and trim. A built-in pouch retains tools while you work on your engine.
Reference No.: 150 SC0 02
In Stock
Warehouse Germany
$ 154.00
without Shipping
without Shipping
Service Cover - FRONT - 996 - 3 Part
Manufactured from heavyweight black vinyl with an extra soft inner lining to preserve the paint and trim. A built-in pouch retains tools while you work on your engine.
Reference No.: 150 SC0 28
In Stock
Warehouse USA
$ 143.00
without Shipping
without Shipping
Service Cover - FRONT - 928
Manufactured from heavyweight black vinyl with an extra soft inner lining to preserve the paint and trim. A built-in pouch retains tools while you work on your engine.
Reference No.: 150 SC0 04
Availability upon request
$ 154.00
without Shipping
without Shipping
Service Cover - FRONT - 911 66-98 (3 pcs)
Manufactured from heavyweight black vinyl with an extra soft inner lining to preserve the paint and trim. A built-in pouch retains tools while you work on your engine.
Reference No.: 150 SC0 13
In Stock
Warehouse Germany
Warehouse USA
$ 143.00
without Shipping
without Shipping
Rear Main Oil Seal Installation Tool - Flywheel Side - Made in Germany
This special service tool was developed for the proper installation of oil the new style dry-fit PTFE seal, which is the seal on flywheel side of crank shaft. Trying to do this task with any other...
Reference No.: FVD 721 T25 0
In Stock
Warehouse Germany
Warehouse USA
SRP: $ 278.13
$ 270.00
without Shipping
without Shipping