Show Results For: Porsche 912 (66-69) Suspension
Active Filter:
Porsche 912 (66-69) SuspensionReference No.: 901 331 261 01
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 75.00
without Shipping
without Shipping
Reference No.: 911 332 191 00
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 10.00
without Shipping
without Shipping
Front Crossmember / Auxiliary Support Bushing 911 / 912 1965-67 - Rear Bushing
High-quality OEM replacement made with original rubber (65 shore hardness value). The bushing cartridge is crafted in high carbon steel and 7075 T6 aircraft aluminum. We source this part in Germa...
Link stabilizer front incl. bushes -73 / 911T -77
Mit Bestellung dieser Artikelnummer liefern wir ein komplettes Stabi-Gehänge (Koppelstange) inklusive der beiden Lagerbuchsen 90134378300 und den beiden Distanzrohren 90134373700. Einbaufertig, Pre...
Rear Sway Bar Drop Link 911 / 930 1965-77 - Left
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold indi...
Reference No.: 901 333 731 01
In Stock
Warehouse Germany
$ 49.00
without Shipping
without Shipping
Rear Sway Bar Drop Link 911 / 930 1965-77 - Right
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold indi...
Reference No.: 901 333 732 01
In Stock
Warehouse Germany
$ 49.00
without Shipping
without Shipping
Trailing Arm Bushing 911 / 912 / 930 1965-89 - Rear - OEM
Replace worn-out rear trailing arm bushings with this OEM bushing, made of rubber with a 65-shore hardness value. 65-shore is what was originally used in all of the OEM bushings, it is quiet and co...
Reference No.: 901 331 059 00
In Stock
Warehouse Germany
$ 51.00
without Shipping
without Shipping
Steering Shaft BRG - Lower - 35 mm 911 -1989 / 914
If you are experiencing a lot of resistance, wobble or grinding when turning the wheel, then you likely have failing steering shaft bearings. High-quality OEM (Original Equipment Manufacturer) r...
Reference No.: 644 333 131 00
Expected in 4-14 days
$ 15.00
without Shipping
without Shipping
Bump Steer Kit - for Lowered Cars Below 30 mm (1.2")
Lowering your car without a bump steer kit effectively pulls the steering out of alignment and requires constant steering adjustments that make the car difficult to control. This adjustable bump s...
Reference No.: FVD 347 911 00
In Stock
Warehouse Germany
Warehouse USA
$ 259.00
without Shipping
without Shipping
Reference No.: PCG 333 051 01
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 298.39
$ 292.00
without Shipping
without Shipping
Bellows / Boot - BILSTEIN - Straight - Ø 51 mm / 135 mm Long
Genuine Bilstein dust bellows / boot. 51 mm diameter and 135mm long. Sold Individually. Right or Left Side Fitment.
Reference No.: 115 000 001 0
In Stock
Warehouse Germany
$ 4.00
without Shipping
without Shipping
Bellows / Boot - BILSTEIN - Ø59 mm / 205 mm
Genuine Bilstein dust bellows / boot. 59 mm diameter and 205 mm long. Sold Individually.
Reference No.: 115 000 000 9
In Stock
Warehouse Germany
$ 8.00
without Shipping
without Shipping
Shock Absorber 911 2.0 L and 2.2 L 1968-71 / 912 - BILSTEIN - REAR - B6 - Street Sport
If you are looking for added damping performance on the Street, the BILSTEIN B6 Performance damper is the ideal solution. This is a direct replacement for cars with standard suspension and is desi...
Shock Absorber 911 / 930 1969-3/89 - BILSTEIN - REAR - B6 - (196/133)
If you are looking for added damping performance on the street, the BILSTEIN B6 Performance damper is the ideal solution. The product benefits at a glance: 196 Compression / 133 Rebound Optimum...
Reference No.: 115 169
In Stock
Warehouse Germany
$ 257.00
without Shipping
without Shipping
Steering Column BRG Support Bushing - Street - 69 Shore Rubber
The original rubber bushing is proven to be a weak link that can fail prematurely, allowing chassis geometry to be compromised. Symptoms include suspension movement during acceleration, braking an...
Reference No.: 901 347 223 03
In Stock
Warehouse Germany
Warehouse USA
SRP: $ 76.79
$ 29.00
without Shipping
without Shipping
Reference No.: 901 332 026 11
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 405.00
without Shipping
without Shipping
CV Boot Repair Kit 911 / 930 1969-84
If your CV Joint Boot is cracked or torn, dirt and debris will adhere to the grease causing premature wear and eventual failure. Replace it with this complete kit comprised of high-quality OEM (Or...
Reference No.: 901 332 293 12EQ
Availability upon request
$ 24.00
without Shipping
without Shipping
Steering Rack Boot / Bellow 911 - OEM
Prevent premature steering rack failure by replacing a torn or worn boot or bellow. We recommend replacing this boot with a new steering rack or tie rod installation. High-quality OEM (Original Eq...
Reference No.: 901 347 191 02EQ
In Stock
Warehouse Germany
$ 21.00
without Shipping
without Shipping
Ball Joint Mounting Nut 911 / 930 / 914 1968-89 - Front - Lower
Secures the front lower ball joint to the wish bone. Sold Individually. Driver's or Passenger's Side Fitment. 2 Necessary Per Car.
Ball Joint 911 / 912 / 930 / 914-4 - Front - OEM
If you are experiencing vibration, noise or the car is not tracking straight, check your ball joint. The ball joint is secured to the wishbone and strut and allows for proper suspension articulati...
Inner Tie Rod End 911 1966-89
The symptoms of a worn tie rod end include, clunking, rattling and squeaking when turning, poor alignment and premature tire wear. Have the rod ends inspected when servicing your suspension and pr...
Ball Joint Lock Plate Washer 911 / 930 / 914 1968-89 - Front - Lower
Secures the front lower ball joint and prevents it from backing out. Sold Individually. Driver's or Passenger's Side Fitment. 2 Necessary Per Car.
Outer Tie Rod End 911-1969-89 / 914 / 914-6 / 912 - With Adjustable Rod
The symptoms of a worn tie rod end include, clunking, rattling and squeaking when turning, poor alignment and premature tire wear. Have the rod ends inspected when servicing your suspension and pr...
Reference No.: 914 341 671 00
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 43.00
without Shipping
without Shipping
Adjustable Spring Plate Set 911 1969-86, 912 69, 930 78-88 - Rear - RS Bushings
Our rear spring plate set is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. The adjustability allows for precise re-indexing o...
Reference No.: 150 910 159
In Stock
Warehouse Germany
$ 665.00
without Shipping
without Shipping
Torsion Bar Set 911 / 912 / 930 1965-86 - Front - Solid - 21mm
High-performance, direct replacement torsion bar set that allow you to dial in the correct spring rate for street or track use. Features: Manufactured from aircraft grade, 4340 alloy steel Heat t...
Reference No.: 150 TB1 821
In Stock
Warehouse Germany
$ 345.00
without Shipping
without Shipping
Front Control Arm / Wishbone Bushing 911 / 912 / 930 1969-89 - Rear - Poly-Graphite
Replace worn-out original front control arm / wishbone bushings with this longer lasting Poly-Graphite plastic bushing. Poly-Graphite is higher density than OEM rubber so suspension components wil...
Reference No.: 150 TBR 900
In Stock
Warehouse Germany
$ 45.00
without Shipping
without Shipping
Front Control Arm / Wishbone Bushing 911 / 912 / 930 1969-89 - Front - Poly-Graphite
Replace worn-out original front control arm / wishbone bushings with this longer lasting Poly-Graphite plastic bushing. Poly-Graphite is higher density than OEM rubber so suspension components wil...
Reference No.: 150 TBF 900
In Stock
Warehouse Germany
$ 44.00
without Shipping
without Shipping
Torsion Bar Set 911 / 912 / 930 1965-86 - Front - Solid - 23mm
High-performance, direct replacement torsion bar set that allow you to dial in the correct spring rate for street or track use. Features: Manufactured from aircraft grade, 4340 alloy steel Heat t...
Stabilizer Bar Bushing 911 / 912 65-73 / 930 75-77 - Front - 19 mm - Poly-Graphite
Replace worn-out original stabilizer bar bushings with this longer lasting Poly-Graphite plastic bushing. Poly-Graphite is higher density than OEM rubber so suspension components will experience l...
Reference No.: 150 PB0 061 9
In Stock
Warehouse Germany
$ 52.00
without Shipping
without Shipping
Stabilizer Bar Bushing 911 / 912 65-73 / 930 75-77 - Front - 16 mm - Poly-Graphite
Replace worn-out original stabilizer bar bushings with this longer lasting Poly-Graphite plastic bushing. Poly-Graphite is higher density than OEM rubber so suspension components will experience l...
Reference No.: 150 PB0 061 6T
In Stock
Warehouse Germany
$ 22.00
without Shipping
without Shipping
Shock 911 1969-89 - BILSTEIN - FRONT - Boge Strut - (Club-Sport)(200/170)
If you are looking for added damping performance for motorsports applications, this damper is the ideal solution. Motorsports dampers include monotube technology with proprietary spring steel valv...
Shock Absorber 911 1968-72 / 912 / 914 - BILSTEIN - front - B6 - Street Sport
If you are looking for added damping performance on the Street, the BILSTEIN B6 Performance damper is the ideal solution. This is a direct replacement for cars with standard suspension and is desi...
Reference No.: 115 112
In Stock
Warehouse Germany
$ 270.00
without Shipping
without Shipping