Show Results For: Porsche 914 (70-76) Engine
Active Filter:
Porsche 914 (70-76) EngineUpper Valve Cover 911 / 914-6 / 930 / 965 3.3 L - Intake
High-quality, cost effective OEM replacement for original part # 901 105 115 03. This cover is designed and manufactured to perform like the original. Please Note: This cover does not have the...
Upper Valve Cover 911 / 914-6 / 930 / 965 3.3 L - Intake - Genuine
Genuine replacement for original part # 901 105 115 03. This is the latest supersession cover that includes the Porsche logo stamped on the top for a perfect restoration. This will require 6 Qt...
Upper Valve Cover Gasket
If you are experiencing oil leaking on the driveway, check your valve covers. High-quality AFM 38 Victor Reinz replacement gasket, designed to perform like the original. AFM 38 is resistant to ...
Reference No.: 930 105 194 04
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 16.86
$ 10.00
without Shipping
without Shipping
V-Belt 911 65-75+79-89/930 75-89/ 914-6 - for Alternator - 10 x 710
Belts undergo a lot of friction and wear. They are cost effective to change and will keep your alternator and engine in good condition. Be sure to follow recommended service and replacement inter...
Reference No.: 999 192 176 5AEQ
In Stock
Warehouse Germany
$ 10.00
without Shipping
without Shipping
Valve Clearance Adjustment Decal / Sticker
Sold Individually. 1 Necessary Per Car.
Valve Cover Gasket Set 911 / 930 / 914 1968-83
This kit contains everything needed for a valve adjustment. High-quality Victor Reinz gaskets with hardware, designed to perform like the original. We source this kit in Germany to ensure quality...
Reference No.: FVD 105 911 930
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 64.71
without Shipping
without Shipping
Valve Guide - Intake / Exhaust - 1st Oversize - 8.9 x 13.26 x 51.1 mm
As valve guides age, they lose their ability to locate the valve to the valve seat. That can create a loss of performance due to the ineffective seal of the combustion chamber. Be sure to replace ...
Reference No.: 039 101 421 EQ
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 21.52
$ 19.00
without Shipping
without Shipping
Valve Spring and Titanium Retainer Set 911 / 964 - Sport
This kit includes a complete package of valve springs, spring plates and Titanium retainers. We recommend using this kit in combination with any of our Sport Camshafts. This kit is manufactured by...
Reference No.: FVD 105 108 80
In Stock
Warehouse Germany
Warehouse USA
$ 1,151.29
without Shipping
without Shipping
Valve Spring Retainer 911 1968-89 / 964 / 965
Genuine part sourced from Porsche AG in Germany to ensure quality, reliability and precise fitment. Sold individually.
Reference No.: 901 105 421 04
In Stock
Warehouse Germany
$ 14.00
without Shipping
without Shipping
Valve Spring Shim 911 1965-98 - 0.5mm
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold indi...
Valve Stem Seal 356B/C ,911 65-89 & 964,965
If you are performing cylinder head work these seals are a necessary replacement. They are located between the valve spring and the valve guide. When these seals are failing, you will notice smok...
Valve Stem Seal Set 356B/C ,911 65-89 & 964,965 (12 pcs.)
If you are performing cylinder head work these seals are a necessary replacement. They are located between the valve spring and the valve guide. When these seals are failing, you will notice smok...
Reference No.: 964 104 111 07SET
In Stock
Warehouse Germany
$ 32.51
without Shipping
without Shipping
Washer - M8 x 1.5 - Aluminum Alloy
Typically used on the left and right crankcase and chain case housing. Sold Individually.
Reference No.: 900 031 014 30
In Stock
Warehouse Germany
$ 2.00
without Shipping
without Shipping
Wrist Pin Bushing - For Connecting Rod - 22 mm
This bushing is located in the small end of the connecting rod on the wrist pin side. Be sure to inspect and replace when refreshing the motor as worn wrist pin bushings can create piston slap whi...
Air Filter - BMC - Carbon Dynamic Air Box
This is a universal air filter system that can replace your restrictive air box and filter. The Carbon-Air box improves the volume of air and increases the velocity. In some applications it can i...
Reference No.: 470 851 50
Expected in 4-14 days
$ 322.00
without Shipping
without Shipping
Air Filter - BMC - Twin Air Design
This conical filter from BMC is a Twin Air (TW) Filter Design. It creates suction laterally and centrally. It is a universal filter and can be used on most vehicles in place of the original air b...
Reference No.: 470 TW9 014 0
Expected in 4-14 days
$ 118.00
without Shipping
without Shipping
Air Filter - BMC - Twin Air Design - with Sensor Cut Out - With Metal Cap + Logos
This conical filter from BMC is a Twin Air (TW) Filter Design. It creates suction laterally and centrally. It is a universal filter and can be used on most vehicles in place of the original air b...
Reference No.: 470 SL9 013 0
In Stock
Warehouse Germany
$ 103.00
without Shipping
without Shipping
Air Filter - BMC - Twin Air Design - with Sensor Cut Out - With Plastic Cap + Logos
This conical filter from BMC is a Twin Air (TW) Filter Design. It creates suction laterally and centrally. It is a universal filter and can be used on most vehicles in place of the original air b...
Reference No.: 470 SL9 013 01
Expected in 4-14 days
$ 95.00
without Shipping
without Shipping
Burette Tool - 100 ml - To Calculate Compression Ratio
Required to calculate compression. Increments in ml and includes a stopcock.
Reference No.: FVD 721 103 99
In Stock
Warehouse Germany
$ 270.00
without Shipping
without Shipping
Decal - Engine - Oil Recommendation
Decals are commonly overlooked when completing a restoration or refreshing the paint. They are often a key detail that sets a car apart when being judged at an event or by a keen aficionado. Sol...
Emergency Cut Off Sticker
ALL MOTORSPORT AND RACING PARTS ARE SPECIAL ORDER ITEMS. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-ref...
Reference No.: 930 006 507 00
In Stock
Warehouse Germany
$ 18.00
without Shipping
without Shipping
Fastener Assembly - Carrillo - For Connecting Rod Bolts
CP-Carrillo’s fastener assembly lube is molybdenum based lubrication grease with enhanced properties. This product offers an improved clamp load repeatability, greater resistance to high pressure a...
Reference No.: FVD 103 975 99
In Stock
Warehouse Germany
Warehouse USA
$ 15.00
without Shipping
without Shipping
Fin Comb Tool - Universal Size - Steel Teeth with Rubber Handle
This Fin Comb Tool is a welcome addition to any tool box and is ideal to maintain the fins on Radiators, Condensers, Evaporators and Heaters. The tool straightens bent fins which reduce efficiency....
Reference No.: 158 531 101 02
In Stock
Warehouse Germany
$ 26.00
without Shipping
without Shipping
Hazet Lambda Probe (O2 Sensor) 1/2" Drive (12.5 mm) Socket
High quality Hazet Lambda Probe (O2 Sensor) 1/2" Drive (12.5 mm) Socket - For 22 mm Lambda Probe (O2 Sensor) Features: Long design Surface: chrome-plated Made in Germany Wrench ...
Hazet Piston Ring Installation Tool
High-quality, German manufactured, Hazet Piston Ring Installation Tool. Features: Clamping strap (32 mm wide) can be unlatched Surface chrome plated Length: 332 mm Diameter min: ...
Reference No.: FVD 721 T67
In Stock
Warehouse Germany
$ 194.00
without Shipping
without Shipping
Hazet Piston Ring Installation Tool Replacement Tension Strap - For Part # FVD 721 T67
This is a Hazet Replacement Tension Strap for the Hazet Piston Ring Installation Tool. Our part # FVD 721 T67. Sold Individually.
Reference No.: FVD 721 T67 SB
Availability upon request
$ 38.00
without Shipping
without Shipping
Hose Clamp - 25-40 x 9mm
Sold Individually.
Oxygen Sensor Screw In Plug - M18 x 1.5 mm
Features: M 18 x 1.5 mm Screw In Stainless Steel Sold Individually.
Porsche Cylinder Head Securing Nut Set - For 6 Cylinders - Reproduction of P140 Tool
Secures to the studs to keep the piston and cylinder in place while rebuilding the engine. Sold as a set of 6.
Reference No.: FVD 721 T50
In Stock
Warehouse Germany
Warehouse USA
$ 62.00
without Shipping
without Shipping
Tool - Camshaft Timing
This degree wheel is used for the precise adjustment of camshafts. Fixed on the crankshaft it shows precise the degrees and the Top Dead Center – Bottom Dead Center (TDC - BDC). This tool makes ad...
Reference No.: FVD 721 100 105
In Stock
Warehouse Germany
$ 78.64
without Shipping
without Shipping
Tool - Dial Gauge Holder - Z Block with Extension Pin
Needed for accurate adjustment of valves. Also includes a 50mm dial indicator extension pin. Dial indicator stem hole is 8mm and the valve head cover screw hole is 10 mm.
Tool - Metric Dial Gauge
A metric dial gauge is a must for setting cam timing, measuring flywheel end play, crank shaft end play, etc. This is an extremely high quality, German “Käfer” gauge whose design conforms to stric...
Reference No.: FVD 721 T63
In Stock
Warehouse Germany
$ 81.00
without Shipping
without Shipping