Show Results For: Porsche Boxster (97-Today) Tools
Active Filter:
Porsche Boxster (97-Today) ToolsReference No.: FVD 721 T48
Expected in 4-14 days
$ 40.00
without Shipping
without Shipping
Reference No.: FVD 721 799 3
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 62.00
without Shipping
without Shipping
PDK Transmission Remove + Replace Tool Set - M 12 x 1.5 Bolts - Prevents Flywheel Damage
Während der (De-)Montage des PDK-Getriebes besteht die Gefahr, dass das Schwungrad durch das Abkippen des Getriebes beschädigt wird, wodurch die Membran plastisch verformt werden kann. Dieses Probl...
Reference No.: FVD 721 300 00PDK
In Stock
Warehouse Germany
$ 48.00
without Shipping
without Shipping
Tire Gauge - FLAIG - 11.8 inch (30 cm) Hose Connector & Release Valve - 4 Bar + 0-57 psi
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release a...
Reference No.: FVD 721 801 049
In Stock
Warehouse Germany
$ 102.00
without Shipping
without Shipping
Hazet Socket - 19mm - 12.5 mm (½") Drive - Manual Operation
This Hazet socket has an outer hexagonal traction profile so that it does not damage or round off lug or bolt edges. It only contacts the lug or bolt along the flat surfaces to prevent damage. F...
Reference No.: FVD 721 900 LG19
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 38.00
without Shipping
without Shipping
Hazet Socket - 19mm - 12.5 mm (½") Drive - Protective Insert + Sleeve - Manual or Impact Operation
Protect expensive Porsche wheels and lugs with this Hazet 19mm Socket made for all Porsche models. This socket includes a plastic insert that protects wheel bolt surfaces along with a yellow plasti...
Reference No.: FVD 721 903 SLG19
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 44.00
without Shipping
without Shipping
Torque Wrench 3/4" 140-980 Nm
Umschaltknarre zur Drehmomentüberprüfung an Verschraubungen mit Rechtsgewinde Klicksignal bei Erreichen des eingestellten Drehmoments Verriegelung des eingestellten Drehmomentwertes in Kunststoffka...
Reference No.: FVD 721 801 0861
In Stock
Warehouse Germany
$ 319.00
without Shipping
without Shipping
Fin Comb Tool - Universal Size - Steel Teeth with Rubber Handle
This Fin Comb Tool is a welcome addition to any tool box and is ideal to maintain the fins on Radiators, Condensers, Evaporators and Heaters. The tool straightens bent fins which reduce efficiency....
Reference No.: 158 531 101 02
In Stock
Warehouse Germany
$ 26.00
without Shipping
without Shipping
Tool
Dieses Sonderwerkzeug dient zur Entfernung der Airbag-Abreißschraube und kann wie das Porsche Sonderwerkzeug 9259 verwendet werden. Dieser Spezialsteckschlüssel dient zur Reparatur von Airbag-Kompo...
Reference No.: FVD 721 102 565AUF
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 680.00
without Shipping
without Shipping
Engine Timing Tool Mod. 981, 987, 991, 997 MA1 + MAB-Motor
Werkzeugsatz zum Einstellen der Motorsteuerzeiten beim Erneuern der Nockenwelle oder der Instandsetzung des Motors für Ihren Porsche 987.2 Cayman und Boxster/ 981 Cayman und Boxster/ 997.2 Carrera ...
Reference No.: FVD 721 116 602
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 542.00
without Shipping
without Shipping
Hazet Piston Ring Installation Tool Replacement Tension Strap - For Part # FVD 721 T67
This is a Hazet Replacement Tension Strap for the Hazet Piston Ring Installation Tool. Our part # FVD 721 T67. Sold Individually.
Reference No.: FVD 721 T67 SB
Availability upon request
$ 38.00
without Shipping
without Shipping
Sachs High Performance Hub Spline Grease - 80g Tube
When installing a clutch disc, Sachs High Performance Grease must be applied to the hub spline in order for the disc to slide along the transmission input shaft correctly. Without greasing the hu...
Reference No.: 420 008 005 0
In Stock
Warehouse Germany
$ 9.00
without Shipping
without Shipping
Torque Wrench 1/2" 10-60 Nm
Hazet 5120-3CT Drehmomentschlüssel (1/2"), 10-60 Nm,) - Abtrieb: 12,5 mm (1/2") - Genauigkeit ± 3% - Drehmomentbereich: 10-60 Nm - Skaleneinteilung: 0,5 Nm - Länge: 320 mm - Made in Germany
Reference No.: FVD 721 801 087
Availability upon request
$ 247.00
without Shipping
without Shipping
Racing Metal Rod End - Numeric Racing - Right Hand Thread
If you are using Numeric Racing Performance Cables on your race car, then we suggest upgrading your rod ends to these steel ends which will take far more abuse at the track. These are recommended ...
Reference No.: FVD 424 049 ER
Availability upon request
$ 20.00
without Shipping
without Shipping
Racing Metal Rod End - Numeric Racing - Left Hand Thread
If you are using Numeric Racing Performance Cables on your race car, then we suggest upgrading your rod ends to these steel ends which will take far more abuse at the track. These are recommended ...
Reference No.: FVD 424 049 EL
Availability upon request
$ 20.00
without Shipping
without Shipping
Shifter Cable Insulation Tubing Set - Numeric Racing - Reduces Interior Noise / Vibration
Numeric Racing High Performance Shifter Cables can transmit additional noise and vibration inside the cabin. These silicone insulation tubes are designed to reduce the intrusive cabin noise. We re...
Reference No.: FVD 424 049 I
In Stock
Warehouse USA
Warehouse Germany
$ 32.00
without Shipping
without Shipping
Inner Caps - Numeric Racing - For Service / Secondary Installation of Shifter Cables (Set=5pcs.)
These Numeric Racing Inner Caps are a single use part designed to lessen noise inside the cabin. So if you plan to service your cables, or re-install your cables into another vehicle these inner ca...
Reference No.: FVD 424 049 C
In Stock
Warehouse USA
Warehouse USA
Warehouse Germany
$ 13.50
without Shipping
without Shipping
Bulkhead Cable Wrench - Numeric Racing - For Installation of FVD 424 049 / 050 / 051 / 052
The perfect complement for a Numeric Racing cable installation. This wrench simplifies installation for Numeric Racing Cables with Part # FVD424049 , FVD424050 , FVD424051 or FVD424052 ...
Reference No.: FVD 424 049 W
In Stock
Warehouse USA
Warehouse Germany
$ 19.99
without Shipping
without Shipping
Reference No.: 190 721 965 901
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 132.00
without Shipping
without Shipping
Reference No.: VW3 853 7
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 104.00
without Shipping
without Shipping
Center Lock Wheel Socket - 90mm - 2.3 kg
Race Design Center Lock Socket - Socket Insert: 1 inch - SW 90 mm - Forged Chrome Molybdenum Steel - Robust Design - Milled Out Profile - For Impact or Torque Wrench Sold Individually.
Center Lock Wheel Socket - 90mm - 4 kg
Workshop grade center lock wheel socket. - Socket insert: 1 inch, SW 90 mm - Forged chrome molybdenum steel - Length: 105 mm - Outside Diameter: 120 mm - Wall thickness: 10 - 16 mm - Weight: 4,050...
Reference No.: FVD 721 911 RSR
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 188.00
without Shipping
without Shipping
Reference No.: FVD 721 901 2MS
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 13.00
without Shipping
without Shipping
Reference No.: FVD 721 901 2M
Expected in 4-14 days
$ 315.00
without Shipping
without Shipping
Gearbox mounting aid set "Gear lifter" admission 25mm "Made in Germany"
Durch eine einfache Aufsteckmontage wird der Getriebeheber zum vielseitig einsetzbaren Werkzeug in Ihrer Werkstatt! Die Montagehilfen ermöglichen ein sicheres und professionelles Arbeiten an Motore...
Reference No.: FVD 721 000 003
In Stock
Warehouse Germany
$ 80.00
without Shipping
without Shipping
Gearbox mounting aid set "Gear lifter" admission 30mm
Durch eine einfache Aufsteckmontage wird der Getriebeheber zum vielseitig einsetzbaren Werkzeug in Ihrer Werkstatt! Die Montagehilfen ermöglichen ein sicheres und professionelles Arbeiten an Motore...
Reference No.: FVD 721 000 004
In Stock
Warehouse Germany
$ 80.00
without Shipping
without Shipping
Jack stands (set = 2 pcs) 3000 kg load capacity
4-Füßiger Unterstellblock Solide gebaut Für hohe Fahrzeuggewichte Hohe Standsicherheit durch Bodenplatten Tragestange aus Stahlguss Schnell verstellbar (im Paar) Eignet sich besonders gut in Kombin...
Reference No.: FVD 721 305 948023
Expected in 4-14 days
$ 121.00
without Shipping
without Shipping
FVD Brombacher Folding Tow Hook - Threaded Type - Left Handed Thread
Our German manufactured tow hook fits all Porsche's with factory threaded (screw-type) tow hooks. Features: Stainless Steel 2” Towing Eye Light Weight: 1.6 lbs. (.76 kg) Fits a...
Reference No.: FVD 722 695 00LGW
In Stock
Warehouse Germany
$ 125.00
without Shipping
without Shipping
Dual Socket Wrench - 3/8" Drive / SW 13 - Chromed - for Intermediate Shaft Flange
High-quality replacement for OEM # 000 721 911 00. This is designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individu...
Heat Shrink Tubing Set (85 pcs)
SCHRUMPFSCHLÄUCHE SORTIMENT 85-TLG. 20x 1/8'' 15x 1/4'' 20x 3/16'' 10x 3/8'' 15x 1/4'' 5x 1/2''
Reference No.: FVD 721 305 948240
In Stock
Warehouse Germany
$ 17.00
without Shipping
without Shipping
Heat Shrink Tubing Set (127 pieces)
Satz besteht aus: 30x ø2,0 x 40mm 25x ø2,5 x 40mm 20x ø3,5 x 40mm 20x ø5,0 x 40mm 16x ø7,0 x 80mm 8x ø10 x 80mm 8x ø13 x 80mm
Reference No.: FVD 721 305 948202
In Stock
Warehouse Germany
$ 14.00
without Shipping
without Shipping
O-ring set (225 pieces)
O-RING SORTIMENT 225-TLG. bestehend aus: 20x: Ø3 x 1, Ø4 x 1, Ø4.5 x 2, Ø5 x 2, Ø6 x 2, Ø6 x 2.5, Ø6 x 3, Ø7 x 2, Ø8 x 2mm 5x: Ø9 x 2, Ø10 x 2, Ø12 x 3, Ø13 x 3, Ø14 x 2.5, Ø17 x 2.5, Ø18 x 4, Ø...
Reference No.: FVD 721 305 948205
Expected in 4-14 days
$ 62.00
without Shipping
without Shipping
Gasket set (150 pieces)
DICHTRING-SORTIMENT 150-TLG. bestehend aus: 1mm dick: 10x: 5 x 10mm, 6 x 10mm, 7 x 10mm, 8 x 12mm, 10 x 16mm 1.5mm dick: 10x: 10.5 x 17mm, 11 x 17mm, 12 x 10mm, 12.5 x 20mm, 14 x 18mm, 14 x 20mm...
Reference No.: FVD 721 305 948210
In Stock
Warehouse Germany
$ 45.00
without Shipping
without Shipping
O-ring set (419 pieces)
O-RING SORTIMENT 419-TLG. Ø3x1.5, Ø4.4x2, Ø5x2, Ø7x1.5mm Ø10x1.5, Ø10x2.5, Ø11x2.5, Ø13x1.5mm Ø13x2.5, Ø14x2.5, Ø16x2.5, Ø18x2.5mm Ø18x3.5, Ø1...
Reference No.: FVD 721 305 948223
Expected in 4-14 days
$ 41.00
without Shipping
without Shipping
Reference No.: FVD 721 305 948233
Expected in 4-14 days
$ 45.00
without Shipping
without Shipping