Show Results For: Porsche Macan (14-Today) Engine
Active Filter:
Porsche Macan (14-Today) EngineOil Filter Kit - Filter + Seal
High-quality Mahle OEM (Original Equipment Manufacturer) replacement oil filter and seal, designed to perform like the original. We source this part in Germany to ensure quality, reliability and p...
Reference No.: 0PB 905 377 B
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 116.00
$ 28.00
without Shipping
without Shipping
Reference No.: 955 102 119 21
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 47.07
$ 44.00
without Shipping
without Shipping
Fastener Assembly - Carrillo - For Connecting Rod Bolts
CP-Carrillo’s fastener assembly lube is molybdenum based lubrication grease with enhanced properties. This product offers an improved clamp load repeatability, greater resistance to high pressure a...
Reference No.: FVD 103 975 99
In Stock
Warehouse Germany
Warehouse USA
$ 15.00
without Shipping
without Shipping
FVD Billet Diverter Valve - Reinforced - Made In Germany - Sold Individually
The FVD Diverter Valve is a German made direct replacement for the OEM diaphragmed valve or for poor quality aftermarket ones that leak, causing boost fluctuations. Our valve is a piston type valv...
Reference No.: FVD 123 212
In Stock
Warehouse Germany
Warehouse USA
$ 150.00
without Shipping
without Shipping
Tool - Vacuum Tester Kit / Brake Bleeder - Complete
High quality, German made brake bleeder and vacuum pump kit. Ideal for use on brakes, clutches, HVAC, bleeding the fuel system or testing vacuum on a turbocharged system. Vacuum can be tested up ...
Reference No.: FVD 721 883 081
Expected in 4-14 days
$ 224.00
without Shipping
without Shipping
Air Filter - BMC - Twin Air Design - with Sensor Cut Out - With Metal Cap + Logos
This conical filter from BMC is a Twin Air (TW) Filter Design. It creates suction laterally and centrally. It is a universal filter and can be used on most vehicles in place of the original air b...
Reference No.: 470 SL9 013 0
In Stock
Warehouse Germany
$ 103.00
without Shipping
without Shipping
Air Filter - BMC - Twin Air Design
This conical filter from BMC is a Twin Air (TW) Filter Design. It creates suction laterally and centrally. It is a universal filter and can be used on most vehicles in place of the original air b...
Reference No.: 470 TW9 014 0
Expected in 4-14 days
$ 118.00
without Shipping
without Shipping
Emergency Cut Off Sticker
ALL MOTORSPORT AND RACING PARTS ARE SPECIAL ORDER ITEMS. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-ref...
Reference No.: 930 006 507 00
In Stock
Warehouse Germany
$ 18.00
without Shipping
without Shipping
Oxygen Sensor Screw In Plug - M18 x 1.5 mm
Features: M 18 x 1.5 mm Screw In Stainless Steel Sold Individually.
Burette Tool - 100 ml - To Calculate Compression Ratio
Required to calculate compression. Increments in ml and includes a stopcock.
Reference No.: FVD 721 103 99
In Stock
Warehouse Germany
$ 270.00
without Shipping
without Shipping
Tool - Camshaft Timing
This degree wheel is used for the precise adjustment of camshafts. Fixed on the crankshaft it shows precise the degrees and the Top Dead Center – Bottom Dead Center (TDC - BDC). This tool makes ad...
Reference No.: FVD 721 100 105
In Stock
Warehouse Germany
$ 78.64
without Shipping
without Shipping
Hose Clamp - 25-40 x 9mm
Sold Individually.
Porsche Cylinder Head Securing Nut Set - For 6 Cylinders - Reproduction of P140 Tool
Secures to the studs to keep the piston and cylinder in place while rebuilding the engine. Sold as a set of 6.
Reference No.: FVD 721 T50
In Stock
Warehouse Germany
Warehouse USA
$ 62.00
without Shipping
without Shipping
Tool - Metric Dial Gauge
A metric dial gauge is a must for setting cam timing, measuring flywheel end play, crank shaft end play, etc. This is an extremely high quality, German “Käfer” gauge whose design conforms to stric...
Reference No.: FVD 721 T63
In Stock
Warehouse Germany
$ 81.00
without Shipping
without Shipping
Tool - Dial Gauge Holder - Z Block with Extension Pin
Needed for accurate adjustment of valves. Also includes a 50mm dial indicator extension pin. Dial indicator stem hole is 8mm and the valve head cover screw hole is 10 mm.
Hazet Lambda Probe (O2 Sensor) 1/2" Drive (12.5 mm) Socket
High quality Hazet Lambda Probe (O2 Sensor) 1/2" Drive (12.5 mm) Socket - For 22 mm Lambda Probe (O2 Sensor) Features: Long design Surface: chrome-plated Made in Germany Wrench ...
Hazet Piston Ring Installation Tool
High-quality, German manufactured, Hazet Piston Ring Installation Tool. Features: Clamping strap (32 mm wide) can be unlatched Surface chrome plated Length: 332 mm Diameter min: ...
Reference No.: FVD 721 T67
In Stock
Warehouse Germany
$ 194.00
without Shipping
without Shipping
Air Filter - BMC - Carbon Dynamic Air Box
This is a universal air filter system that can replace your restrictive air box and filter. The Carbon-Air box improves the volume of air and increases the velocity. In some applications it can i...
Reference No.: 470 851 50
Expected in 4-14 days
$ 322.00
without Shipping
without Shipping
Tool - Vacuum Tester Kit / Brake Bleeder
Vacuum testing is gaining more importance every day as cars have more sophisticated servo-feedback devices fuel injection, EGR, emission controls, air conditioning, door locks, etc. You can waste h...
Reference No.: FVD 721 883 0810
In Stock
Warehouse Germany
$ 67.00
without Shipping
without Shipping