Adjustable Lower Control Arm Set - 986 / 996 / 987 / 997 / 981 / 718 Front + Rear - 991 Front Only

Beskrivelse

The factory control arms cannot provide the negative camber necessary when lowering your Porsche, leaving you stuck with toe in. The result is poor handling and rapid tire wear. Restore proper suspension geometry with this GT3 style, adjustable lower control arm set.

This set can provide the camber and caster adjustments necessary via an adjustable design and via the thrust arm bushing just like GT3 models. Additional negative camber can be achieved with shims (sold separately). Each corner or just the front can be adjusted depending on the model, please check our model fitment tab for accurate fitment.

Features:
Adjustable Two Piece GT3 Style Design
Caster Adjustable Thrust Arm Bushing
Additional Negative Camber Added with Shims (Sold Separately)
Control Arm Crafted from Forged 6082-T6 Cast Aluminum
75A Durometer Inner Control Arm and Thrust Arm Bushings
Improved Handling on Lowered Vehicles
Increased Suspension Feedback
Natural Rubber Bushings
Inner Control Arm Bushing Crafted from 6061-T6 Aluminum

Available Separately:
Shims
Litronic Headlight Brackets
Thrust Arm Spacers

Torque Values:
Bushing to Control Arm – 27 Nm (20 lbs.-ft)
Inner Control Arm Bushing to Body - 120 Nm (89 lbs.-ft)
Thrust Arm to Control Arm - 160 Nm (118 lbs.-ft.)
Outer Ball Joint – 75 Nm (56 lbs.-ft.)

Sold as a set. Left and right side included. 1 set necessary per car.

Please note: This part fits the front and rear and front only of multiple models, please check the model fitment tab to ensure accurate fitment.