Vis resultater for: Verktøy Porsche 356 (50-65)
Aktivt filter:
Verktøy Porsche 356 (50-65)Hydraulic Table "Master Gear" with "Sportscar Powertrain Mounting Jig"
Lasthub elektro-hydraulisch, Steuerung über Drucktasten (Auf und Ab), Feinhub hand-hydraulisch, bei Master Gear 0,5/1,0 erfolgt Lasthub fußhydraulisch, Ablaß per Fußbedienung (das integrierte Senkb...
Dele #: FVD 721 102 565
NOK 137 136,00 Uten MVA
Dele #: FVD 721 HA1 007S2
NOK 720,00 Uten MVA
Dele #: FVD 721 000 001
NOK 2 384,00 Uten MVA
Dele #: FVD 721 000 002
NOK 2 384,00 Uten MVA
Jack stands (set = 2 pcs) 3000 kg load capacity
4-Füßiger Unterstellblock Solide gebaut Für hohe Fahrzeuggewichte Hohe Standsicherheit durch Bodenplatten Tragestange aus Stahlguss Schnell verstellbar (im Paar) Eignet sich besonders gut in Kombin...
Dele #: FVD 721 305 948023
NOK 1 424,00 Uten MVA
Dele #: FVD 721 802 0381
NOK 384,00 Uten MVA
Dele #: FVD 721 802 038
NOK 400,00 Uten MVA
Master wheel bearing & hub R&R kit with case
WHEEL BEARING & HUB R&R KIT This is the only unit in the world for R&R of the Rear Wheel Hub & bearing of German vehicles, as well as Front Wheel Hub & Bearing. Special Designed for 911, 912, 924,...
Dele #: FVD 721 TB9 0
NOK 22 336,00 Uten MVA
Messing Brush
Aus Messing zum Reinigen der BremssättelMaterialschonendes Reinigen durch weiche Messingborsten Schmal für enge Bremsschächte DBGM, mit Kunststoffgriff
Dele #: FVD 496 83
NOK 144,00 Uten MVA
O-ring set (225 pieces)
O-RING SORTIMENT 225-TLG. bestehend aus: 20x: Ø3 x 1, Ø4 x 1, Ø4.5 x 2, Ø5 x 2, Ø6 x 2, Ø6 x 2.5, Ø6 x 3, Ø7 x 2, Ø8 x 2mm 5x: Ø9 x 2, Ø10 x 2, Ø12 x 3, Ø13 x 3, Ø14 x 2.5, Ø17 x 2.5, Ø18 x 4, Ø...
Dele #: FVD 721 305 948205
NOK 720,00 Uten MVA
O-ring set (419 pieces)
O-RING SORTIMENT 419-TLG. Ø3x1.5, Ø4.4x2, Ø5x2, Ø7x1.5mm Ø10x1.5, Ø10x2.5, Ø11x2.5, Ø13x1.5mm Ø13x2.5, Ø14x2.5, Ø16x2.5, Ø18x2.5mm Ø18x3.5, Ø1...
Dele #: FVD 721 305 948223
NOK 480,00 Uten MVA
Dele #: FVD 721 T24 2
NOK 672,00 Uten MVA
Dele #: 190 460 410
NOK 6 240,00 Uten MVA
Dele #: FVD 721 T21 0
NOK 1 264,00 Uten MVA
Dele #: 190 721 965 901
NOK 1 552,00 Uten MVA
Porsche Cylinder Head Securing Nut Set - For 6 Cylinders - Reproduction of P140 Tool
Secures to the studs to keep the piston and cylinder in place while rebuilding the engine. Sold as a set of 6.
Dele #: FVD 721 T50
NOK 720,00 Uten MVA
Dele #: FVD 721 VW4 02
NOK 1 360,00 Uten MVA
Dele #: FVD 721 VW4 01
NOK 1 376,00 Uten MVA
Dele #: FVD 721 304 7A
NOK 3 664,00 Uten MVA
Race Tape - ALUMINUM
Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. PE coated cloth tape, waterproofed. Excellent for repairs...
Dele #: 240 600 110
NOK 288,00 Uten MVA
Race Tape - BLACK
Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. PE coated cloth tape, waterproofed. Excellent for repairs...
Dele #: 240 600 100
NOK 192,00 Uten MVA
Race Tape - RED
Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. PE coated cloth tape, waterproofed. Excellent for repairs...
Dele #: 240 600 103
NOK 192,00 Uten MVA
Race Tape - SILVER
Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. PE coated cloth tape, waterproofed. Excellent for repairs...
Dele #: 240 600 102
NOK 192,00 Uten MVA
Race Tape - WHITE
Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. PE coated cloth tape, waterproofed. Excellent for repairs...
Dele #: 240 600 101
NOK 192,00 Uten MVA
Race Tape - YELLOW
Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. PE coated cloth tape, waterproofed. Excellent for repairs...
Dele #: 240 600 106
NOK 192,00 Uten MVA
Sachs High Performance Hub Spline Grease - 80g Tube![OEM Supplier OEM Supplier](/adbimage/120701/w320/oem-supplierpng.jpg)
When installing a clutch disc, Sachs High Performance Grease must be applied to the hub spline in order for the disc to slide along the transmission input shaft correctly. Without greasing the hu...
![OEM Supplier OEM Supplier](/adbimage/120701/w320/oem-supplierpng.jpg)
Dele #: 420 008 005 0
NOK 96,00 Uten MVA
Dele #: FVD 721 804 087
NOK 720,00 Uten MVA
Dele #: FVD 721 804 081
NOK 720,00 Uten MVA
Dele #: FVD 721 901 2MS
NOK 144,00 Uten MVA
Sound meter Type 2 (30 to 130dB) +/-1.4dB with Backlit Display
This sound level meter is a high accuracy instrument that meets ANSI and IEC 651 Type 2 standards. The sound level meter has high (65 to 130dB) and low (35 to 100dB) measuring ranges enabling its u...
Dele #: FVD 721 407 732
NOK 2 320,00 Uten MVA
Dele #: FVD 721 802 0382
NOK 528,00 Uten MVA
Special tool kit for mounting Shock Absorbers
Inhalt : - 10 lange Steckschlüssel (14,15,16,17,18,19,21,22,24 mm). - 3 Verbindungsstücke m. Schraubeinsatz f. Schlitzschrauben 5,6 u. 8 mm. - 3 Verbindungsstücke mit 6-Kant-Schraubeinsatz, 8, 9 u...
Dele #: FVD 721 115 100
NOK 8 240,00 Uten MVA
Synchro-tester
Tool for synchronizing carburettors. Measures the air intake on each carburettor or mechanical fuel injection stack for a smooth idle and power delivery. Easy to use.
Dele #: FVD 721 T27 SK
NOK 1 104,00 Uten MVA
Dele #: FVD 721 116 594
NOK 3 888,00 Uten MVA
thread repair kit Time-Sert M10x1,5 "14 parts"
The TIME-SERT system is based on a solid steel bush machined from a solid piece of material. The thin-walled bush is press-fitted to the workpiece. Therefore, TIME-SERT is able to withstand high co...
Dele #: FVD 721 000 000
NOK 4 768,00 Uten MVA
Tire Gauge - FLAIG - 11.8 inch (30 cm) Hose Connector & Release Valve - 4 Bar + 0-57 psi
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release a...
Dele #: FVD 721 801 049
NOK 1 200,00 Uten MVA
Tire Gauge - FLAIG - 45° Adapter
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is measured via fingertip button an...
Dele #: FVD 721 801 046
NOK 512,00 Uten MVA