Sport Exhaust System 991.2 Turbo/S - Brombacher - Sound Version - For OEM Tips
Sport Exhaust System 991.2 Turbo/S - Brombacher - Sound Version - For OEM Tips
Sport Exhaust System 991.2 Turbo/S - Brombacher - Sound Version - For OEM Tips

Sport Exhaust System 991.2 Turbo/S - Brombacher - Sound Version - For OEM Tips

Part #: BES 991 202 40SHD
Delivery Time: In StockIn Stock
Warehouse USA

$ 3,933.00
without Shipping


Deep, rich, low Flat 6 turbo tone, without the negative drawback of drone.

- + 25 Hp & + 19 torque
- 200 Cell high flow, tri metal german HJS “HD” high durability matrix sports catalysts.
- 2 3/4" tubing (70mm) for max. power across the rpm range.
- T 316 lightweight motorsport stainless steel = improved durability over T 304.
- 5 on a scale of 1-10 in volume (1 being stock) below 3,000 rpms, 8 on a scale of 1-10 in volume under maximum load (3 being stock).
- “Aeroquip” cone style catalytic connection design to prevent exhaust leaks.
- Includes “Aeroquip” quick release clamps.
- Made in Germany.
- Modular design for 100 cell, 200 cell or bypass use.
- Intoxicating motorsports growl at idle, partial throttle and wide open throttle.

Please Note:
Exhaust tips are not included! Stock tip adapter is included.

“BROMBACHER” MUFFLERS are vastly different than the common aftermarket, baffle plate and packing type mufflers. Our mufflers are uniquely made with double perforated sound absorption tubes. These tubes are made in a trapezoidal pattern and are perforated with varying diameters, which isolates and dampens unwanted drone frequencies. In relation to performance, they produce much less flow restriction at higher gas velocities, which translates to larger horsepower gains at higher RPMs. Also, they prevent a total loss of backpressure at lower rpms, so low end torque loss is minimized. Perhaps the greatest benefit of the “open architecture” design, is the strong, linear, firing-order dominated flat-6 Porsche® sound with aggressive gurgling and crackling off throttle.

THE CATALYTIC CONVERTER cores used in this system are the most advanced in the industry. They are produced by HJS in Germany and are a 200 CPSI (cell per square inch) tri-metal design. Tri-Metal cats are the freest flowing and environmentally friendly aftermarket cats produced today. Tri-metal catalytic converters are Rhodium, Platinum and Palladium coated and perform all three necessary and mandated reactions to prevent pollution. Reduction of nitrogen oxides to nitrogen and oxygen, oxidation of carbon monoxide to carbon dioxide and oxidation of unburnt hydrocarbons to carbon dioxide and water simultaneously. But we didn't stop there with these catalytic converters; we also opted for the most expensive HJS “HD” cores. The new generation of HJS high performance catalysts is characterized by 30 % less weight and 15% less backpressure. They are nicknamed “HD” for high durability matrix design catalytic converters. They have a “SM-matrix” (winding of three flat and corrugated foils) and a special connection to the matrix sheath (see picture below), which equates to extremely high flow and durability for track and street use. Many of our competition simply state the cells per square inch or “German Cats” but they are not specific as this portion of any exhaust system is THE MOST EXPENSIVE component. We choose to include the best cores available on the market to ensure years of trouble free operation, reduce weight, increase horsepower and protect the environment.

THE ENTIRE “BROMBACHER” EXHAUST LINE is made by a premier motorsports manufacturer, M&M Exhaust, GmbH in Germany. “Brombacher” exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. They are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all our exhaust systems meet the material standards of the German independent testing agency TÜV (some exhausts do not pass the sound standards as they are louder than the TÜV requires – please enquire) ; whose quality standards are among some of the strictest in the world. All this research, development and testing ensures maximum horsepower gains throughout a broad power band; all while maintaining reasonable sound levels for the street and provide a distinct, sporty exhaust note that is purely Porsche®.

Package Information

Size: 34.65 x 16.54 x 9.45 inches
Product weight incl. Packing: 40.12 pounds
FID: BES.991.202.40SHD


seriesModellWithout TÜV
991.2 TT (16-)991.2 Turbo, 3.8L, 397kW (16-)
991.2 Turbo S, 3.8L, 427kW (16-)
Personalized Service

Allow our experienced and knowledgeable staff to assist you. Simply contact us via e-mail or phone to experience the advantage of purchasing parts from FVD Brombacher.
Schnelle Lieferung
Fast Delivery

We keep an extensive inventory on hand.  If your order is in stock and you contact us before 12 noon, we can ship it that day via UPS.
sichere Bezahlung
Secure Payment Methods

We insist upon the highest encryption standards to ensure that your information is safe.  Secure payment modalities include Pay Pal, Concardis Credit Card Transactions (PCI DSS Certification) and Bank / Wire Transfer.