FVD article number / Reference number:
CARKLS0009711

Cargraphic Exhaust Valve Control Unit - For 2 Electronic Exhaust Valves - With 2 Remote Units

Name: Cargraphic Exhaust Valve Control Unit - For 2 Electronic Exhaust Valves - With 2 Remote Units
SKU: CARKLS0009711
Price: 876 USD
Availability: BackOrder

~~MSRP $933.00~~

$876.00

excl. shipping*

6–10 working days (the dates given are based on estimates and on standard national and international shipping with a standard-sized parcel and do not represent a guaranteed delivery time).

Product description

Background
On modern Porsche models, the factory electronic exhaust valve strategy is calibrated primarily for emissions compliance, drive-by noise regulations, and refinement. Valve operation is dictated by engine load rather than driver intent, meaning that during idle, light throttle, and low-to-mid RPM driving, the exhaust remains largely closed—even in Sport or Sport Plus modes. The result is an exhaust system that only reaches full volume under heavy load or wide-open throttle.

This behavior becomes most apparent in the moments where sound actually matters: pulling up at a traffic light, cruising through town, blipping the throttle at a Cars & Coffee event, or arriving at a Porsche gathering. Instead of presence and character, the exhaust stays muted, often falling flat in a way that feels out of place for a car of this caliber. The CARGRAPHIC 3-Mode Exhaust Valve Control Unit addresses this limitation by placing exhaust valve control directly in the driver's hands while preserving factory operation when discretion is preferred.

Engineering & System Design
The CARGRAPHIC 3-Mode Exhaust Valve Control Unit is installed inline between the factory exhaust valve actuators and the original equipment (OE) control system, overlaying the factory logic without altering it. Using OE-style connectors and model-specific wiring, the system integrates seamlessly into the vehicle's electrical architecture while maintaining signal stability and long-term reliability under thermal and electrical load.

Three selectable operating modes allow the driver to actively tailor exhaust valve behavior to suit different driving conditions and environments. SPORT mode commands the exhaust valves to remain fully open for maximum acoustic presence, COMFORT mode keeps the valves fully closed for reduced sound levels, and AUTOMATIC mode fully restores factory ECU control. This expanded functionality provides greater flexibility than the standard two-mode configuration, while preserving full OE operation when desired.

A programmable start-up function allows the driver to define the default valve position at engine start, adding an additional layer of personalization and control.

Functionality & Operation
The control unit operates using three selectable modes, activated via high-quality CARGRAPHIC remote controls:

• SPORT Mode: Exhaust valves remain fully open at all times
• COMFORT Mode: Exhaust valves remain fully closed
• AUTOMATIC Mode: Factory exhaust valve control logic is fully restored

The programmable start-up function allows the driver to select whether the exhaust valves default to open or closed upon engine start.

FVD Word of Advice
By unlocking direct and unrestricted control over exhaust valve operation, the system allows the factory exhaust to be experienced without electronic limitation. While this reveals its true character, it also makes the acoustic ceiling of the original muffler immediately apparent. Based on our experience, this is often the point where enthusiasts recognize that achieving a deeper, more expressive exhaust note requires an upgraded muffler or a complete performance exhaust system.

Important Notice & User Responsibility
Permanent closing of the exhaust valves—especially during sustained high engine load, high RPM operation, or full power driving—can result in excessive exhaust backpressure and may cause serious engine or exhaust system damage. COMFORT mode is not intended for use under these conditions.

By installing and operating this product, the vehicle owner and operator acknowledge full responsibility for its use. FVD Brombacher and the product manufacturer shall not be held liable for any damage, mechanical failure, or consequential loss arising from improper operation, misuse, or failure to follow usage recommendations.

Factory Integration & Installation
Designed specifically for modern Porsche models equipped with factory electronic exhaust valves, the CARGRAPHIC control unit reuses the OE valve actuators and connectors without modification. Factory drive modes, button functionality, and ECU logic remain fully intact when operating in AUTOMATIC mode, ensuring OE-level usability and no warning lights or fault codes when installed correctly.

Installation is fully reversible and leaves no permanent trace on the vehicle. For reliable long-term operation, the control module must be mounted in a dry, heat-protected location and the wiring harness routed correctly. Due to the electrical nature of the system and the importance of proper placement, professional installation by a qualified specialist workshop is strongly recommended.

Quick Highlights
• 3-Mode Valve Control:Open, closed, or factory-controlled operation
• Expanded Flexibility:SPORT, COMFORT, and AUTOMATIC modes
• Programmable Start Function:Define valve position at engine start
• OEM Plug-and-Play Integration:No permanent vehicle modifications
• Remote Control Operation:Includes CARGRAPHIC-branded remotes
• Traceless Removal:Fully reversible installation
• Precision Electronics:Designed for stable, long-term operation
• German Manufacturing:Engineered and built in Germany

Included Components
• CARGRAPHIC exhaust valve control unit
• Model-specific wiring harness for factory actuators
• Two CARGRAPHIC remote controls

About FVD Brombacher
Since 1984, FVD Brombacher has focused exclusively on Porsche performance. Every component we offer is selected and presented to meet our standards for engineering quality, functional integrity, and seamless integration. Based in Germany, we manage worldwide logistics in-house to ensure precision handling, fast delivery, and expert product support.

Regulatory & Use Notice
This product is supplied as an export / motorsport component and is not approved for use under public road traffic regulations. Compliance with local noise, emissions, and vehicle regulations is the responsibility of the vehicle owner.