Software Macan S 19- 400CH/580Nm

+46 HP and +74 TQ gain on the Macan with ultra-smooth drivability and the reliability that you expect from your Porsche.

FVD Software Power Gains (Solid lines on Dyno Graph):
Max. Power – 294 kW / 400 PS / 400 HP @ 5,900 rpm
Max. Torque – 580 Nm (428 lb. ft.) @ 3,450 rpm
Max. Speed – 265 km/h (165 mph)
Max. RPM – 7,000 rpm
Acceleration 0-100 km/h (0-62.5 mph) – 5.0 s

Stock Macan S - Porsche AG (Germany) stated power (Dotted lines on Dyno Graph):
Engine – V6 Twin-Turbo
Capacity – 2997 ccm
Max. Power – 260 kW / 354 PS / 354 HP @ 5,400 - 6,400 rpm
Max. Torque – 480 Nm (354 lb. ft.) @ 1,400 – 4,800 rpm
Max. Speed – 254 km/h (158 mph)
Max. RPM – 6,700 rpm
Acceleration 0-100 km/h (0-62.5 mph) – 5.3 s

Please Note: Software installation requires removing and sending the vehicles ECU to our headquarters to be unlocked and programmed. Please contact us for removal instructions. We are diligently working on a flash option via the OBD2 Port with the My Genius Tool (after the ECU is unlocked), but that option is not available currently. Once available, you can purchase a My Genius Tool, part # 39135which will allow you to write the FVD Software File or Original Software File to the car via the OBD2 Port.

FVD Brombacher Software = Power with Peace of Mind.

Since 1983, FVD-Brombacher has been setting the standard for Porsche engine building and tuning in Germany. Our broad mechanical knowledge of the flat 6 Porsche engine naturally led to our development of Engine Management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importantly reliability. Unlike many others in the industry, our only focus is software for Porsche. This allows us to bring you the most polished, factory-smooth and powerful aftermarket software product for Porsche period.

POWERFUL – We modify the ignition timing, optimize the air /fuel ratios, increase the rev limiter and modify the boost mapping. Each of our programs is custom written for each of your vehicle's modifications. That means that we can extract the maximum performance gains over what our competition can offer you. For all Porsche vehicles from 2000 upwards, we also alter the throttle response which effectively negates the throttle delay found in E-Gas or drive by wire vehicles. The throttle response is improved linearly so that you don't experience sharp increases commonly found with other software tuners who tend to exacerbate the throttle response. For us, the “Devil is in the details”, so we concentrate on laying the power down more smoothly, while providing consistent linear acceleration.

RELIABLE – All of the OEM engine software safety features are left fully intact and are not disabled. So, you will benefit from the added performance without sacrificing the reliability that the Porsche brand is renowned for. We use the latest original software from Porsche to build our tuning file on, so you will have all the latest Porsche dealer software updates included. In addition, our software engineers have been trained by Bosch and Siemens in Germany, so you receive their factory expertise in writing software code for Porsche. They have been writing software for Porsche since 1983, before many of our competitors were even established; very few can make that same claim. Most importantly, our software engineers are committed to software tuning for PORSCHE ONLY, so our sole purpose is to write the most polished Porsche software available in the industry.

REVERSIBLE – FVD Software is completely reversible and can be overwritten. A Dealer can still complete regular service / diagnostics with our software onboard.

ADAPTABLE– Our software is adaptive and as such we give you hundreds of software timing maps. Each of our maps are tied into the vehicle's sensor information so with differing variations in climate, throttle, altitude, exhaust gas temperature and octane our software automatically adjusts to give you superior performance and a factory-smooth feel. We also adjust the software to accommodate 91-100 North American ((RON+MON)/2) and Rest of World 95-104 (RON) octane automatically (adjusts timing and knock sensors accordingly). This is done automatically without the need of external hardware, just fill and go! If you want to change the intake or add sport filters in the future, our software will also adapt, simply install and feel the gains without the hassle of sending the ECU back or having to install another file.

ECONOMICAL– Since our software is adaptive, we can offer un-paralleled savings over our competition and there is no additional hardware needed. Our listed software price allows you to add modified mufflers, exhaust tips, muffler bypass and high flow intakes without having to pay for an updated or “Custom” software file. In contrast, many of our competitors charge you for each individual hardware upgrade, some may call their tuning “Custom” and charge you for performance in stages and even charge you for software programming assistance. On that note, we offer you free technical assistance for any questions you may have pertaining to upgrading your software. Simply call or email our technical assistance and speak directly to our programmers in Germany. They are available Monday – Friday from 3 am E.S.T. until 1 pm E.S.T.

GUARANTEED – 30-day money back guarantee! If you are not satisfied with the power, simply send the ECU back to us and we will set it back to stock. No questions asked. Want to compare our tune with your current tuner's software? No worries, your covered.